E-File Pen & Dust Brush Duo

• E-File Pen Includes: E-File Pen, Typhoon Drill Bit, and charging cable.
• E-File Pen Charging: Charge using the supplied USB-A to USB-C cable.
• E-File Pen Charging Time: 2 hours (approx.). The display will flash '88' while charging, and stop flashing once fully charged.
• E-File Pen Power: 3W.
• E-File Pen Min Speed: 12,000 RPM.
• E-File Pen Max Speed: 15,000 RPM.
• E-File Pen Size: 2.6cm x 18cm.
• E-File Pen Weight: 271g (approx.).
• E-File Pen Cable: 5V, 2A.
• E-File Pen Battery: 800maH Polymer Lithium.
• E-File Pen Body Material: Aluminum Alloy.
• E-File Pen Power Consumption: 3W.
• E-File Pen Noise Levels: Operates within noise levels of 57–59 dB, similar to a normal conversation, safe for 12-24 hours of continuous use.
• E-File Pen Drill Bit Size: Standard 3/32".
• Dust Brush Size: 5cm (width) x 8.7cm (height).

• Only use on gel manicures that include Builder Gel (except when used with 240 Grit Sanding Bands or Cuticle Drill Bits).
• Read E-File Pen User Guide for more information.
• Watch E-File & Drill Bits tutorials on YouTube.

E-File Pen

• To clean, with the Drill Bit still inserted and the E-File Pen turned off, use the Gelous Dust Brush to brush away debris. Wipe away any remaining dust with a lightly dampened cloth and allow to air dry.
• Never use Nail Polish Remover or acetone-based products on the E-File Pen itself.
• If Gel Nail Polish is stuck on your Ceramic or Diamond Drill Bit, soak for approximately 10 seconds in Nail Polish Remover, then wipe clean with a Lint Free Wipe.
• Only clean Sanding Bands with a Dust Brush or dry Lint Free Wipe; do not wet.
• Replace Drill Bits when they feel dull, show visible wear, stop removing product efficiently, or require more pressure, usually after 3-6 months.
• Replace Sanding Band when it starts to look worn or lose grit, usually after 1-2 uses.

Dust Brush

• After each use, brush the bristles in a circular motion over your palm to loosen and shake out the dust.
• Store upright to preserve bristle shape. 
• Every 3–5 uses, clean more thoroughly. Swirl the bristles in a dish of dish soap, baby shampoo or brush cleaner, rinse, and gently squeeze out water. Avoid wetting the base, and air dry flat on a paper towel.